Liquid Photopolymer Resin

Our range of liquid photopolymer resin is available as SKYTONE LX-150 which is UV curable resins of 45/50 durometers (Shore A). These are specifically designed for fabricating hand stamp (polymer rubber stamp). These are manufactured under controlled UV light radiations where in liquid polymers convert in flexible and dimensionally stable plates which are highly compatible with water and oil based ink. Features And Properties: • Excellent Print Quality • Low Tack Resin • Good Dimensional Stability • Environmentally Friendly • Wide Exposure Latitude • Long Shelf Life • Deterioration on Long Storage • Physical Properties • Durometer 45/50 • Moisture resistance Good • Abrasion resistance Excellent • Oxidation resistance Excellent • Ozone resistance Excellent • Specific gravity: 1.025.

Liquid Photopolymer Resin UV curable resins of 45/50 durometers (Shore A). Resin is specifically design for making Hand Stamp (Polymer Rubber Stamp). Under Controlled UV Light radiations, Liquid polymers convert into flexible and dimentionally stable plates. The compatibility of the plates is excellent with water and oil based ink.

Features :-

• Excellent Print Quality.
• Low Tack Resin.
• Good Dimensional Stability.
• Environmentally Friendly.
• Wide Exposure Latitude.
• Long Self Life, No or Very Neglibale Deterioration on Long Storage .
• Excellent Compatibility with Water and Oil Inks.

Physical Properties
	Durometer	45/50
	Moisture resistance	Good
	Abrasion resistance	Excellent
	Oxidation resistance	Excellent
	Ozone resistance	Excellent
	Specific gravity	1.025

Description and outstanding Characterstic

• KIVI Photopolymer are colorless liquid Photosensitive polyuretane elastomer. This liquid polymerizes when exposed to an Ultra violet light source having spectrum range between 310 and 380 nanometer.
• The polymerization process convert the liquid resin in to an elastomer that is commonly used for making flexo graphic plates for printing paper, corrugated
• box and for making RUBBER STAMP.
• Even large dimension plate can be produce.
• Excellent printing quality.
• Good dimensional stability.
• Tack free plates.
• Long life if not exposed to direct sun light.
• Easy mounting on press presses.
• Extremely economic plate price.

General Instruction and Precaution

• Store liquid resin at temperature between 2° and 28° C in closed container.
• Do not expose the liquid photopolymer to the direct sunlight under any circumstances.
• When producing stamp, always wear protective clothing, gloves safety glasses.
• Never mix two different resin from different source.
• KIVI resin must be used with compatible substrate sheet and accessories.
• Always keep away from children.
• Fresh polymer and recovered polymer should use carefully.

       
Uses

• For Making Hand Stamp(Rubber Stamp).
• For Making Printing Plates for Labels, Envelope Etc.

      

Safety Information and Labeling

• Both polymer have an LD50 exceeding 5000mg/kg of body weight. This means that they are non dangerous.
• The labeling according to 93/72/CE and94/69/CE laws resumed in the following table.

Additional Information
   

• Non Flammable        
• Non Toxic
• Non Oxidizing    
• Non Harmful
• Non Explosive
• Non Volatile
• Non Corrosive
• Odourless

 

Custom Teriff Heading
   

• Custom Teriff Heading Number : 37079090     

Our range of Stamp resin is available as SKYTONE LX-150 which is UV curable resins of 45/50 durometers (Shore A). Stamp resin are specifically designed for fabricating hand stamp (polymer rubber stamp). These are manufactured under controlled UV light radiations where in liquid polymers convert in flexible and dimensionally stable plates which are highly compatible with water and oil based ink.
Sailent Features Excellent Print Quality
* Low Tack Resin
* Good Dimensional Stability
* Environmentally Friendly
* Wide Exposure Latitude
* Long Self Life, No or Very Neglibale Deterioration on Long Storage
* Excellent Compatibility with Water and Oil Inks